Industrial Engineering • Prefab • Systems Installation

פתרונות צנרת, קונסטרוקציה וציוד תהליכי על בסיס תכנון

Models and Shop Drawings

Production of 3D models, spools, and accurate manufacturing drawings for clean and fast installation in the factory.

Manufacturing and installation of process piping

Manufacturing and installation of process lines, water, steam, stainless steel and steel - in full compliance with the area and existing equipment.

Manufacturing and installation of steel constructions and facilities

Manufacturing and assembly of frames, supports, platforms and suspension systems based on precise engineering models.

Advanced Welding Services and Welder Qualification (WQT)

Preparing welders, performing welding tests, professional supervision and NDT tests in a certified laboratory.

Industrial maintenance and troubleshooting

Rapid response, repairs, reinforcements and welding to maintain equipment availability and uninterrupted production.

Because with us, the job is completed correctly the first time > accurate, fast and adapted to industrial field conditions.

Zero surprises in the field

We work with precise measurement, system coordination, and planning closure before execution. This means for the customer: there is no sudden “it doesn’t fit”, no disassembly, no production stops.

Minimum downtime, maximum production continuity

Everything leaves the workshop ready. This means less time on site, fewer risks and the factory continues to work almost without stopping.

Extremely high welding standard

פיקוח מהנדס ריתוך בינלאומי (IWE) ובדיקות NDT איכות שמחזיקה שנים ללא תקלות.

Real industrial experience

We understand production processes, safety, and operations. We know how to integrate into a live factory without disrupting production.

Process piping design, manufacturing and installation project including installation of mechanical equipment 2025

Project planning, production and installation of a steam system 2024

Cooling system replacement project 2024

Air emissions treatment project 2023

2022 filter conveyor production and installation project

Heavy powder facility transfer project 2022

The chiller installation project includes the production of PPR piping and installation in 2022

Installation of a powder drying facility, including filters and a new cooling system in 2021

Disassembly project and assembly line production line for marble surfaces 2021

❑ Feed Pipe Project Material for Packaging 2021

Costume 2020 manufacturing product mixer project

Packaging department insulated panel installation project 2020

❑ Silo project for storing finished products, 2019

❑ Production gas suction system project, 2018

Packaging Containers Project, 2018

❑ Production Tower Renovation Project, 2017

❑Stainless Steel Liquid Production Tool Project, 2016

How S. Kubati solves complex engineering problems on time, on budget and with zero surprises

CASE STUDY 1 — Piping Project in a Paper Mill

The challenge: The client provided initial design + isometrics, but a site inspection revealed major differences that were going to cause execution delays. The solution: Site measurements, building a new AS-BUILT 3D model, redesigning and producing clean isometrics. The result: a smooth, problem-free installation, cost savings and work delivered ahead of schedule.

2 CASE STUDY – Upgrading a production line in an industrial marble factory

We dismantled heavy equipment in 3 days instead of 4. We reinforced the Italian installation team and finished in 2 and a half weeks instead of 4 weeks.

We specialize in performing complex work that does not fit into any standard category. Work that requires a combination of engineering thinking, industrial experience, and closing gaps in the field.

תכנון וייצור בהתאמה אישית

When there is no off-the-shelf product, when the factory needs a special solution, and when there is a question of whether someone needs to “invent” a new part from scratch: this is exactly where S. Kubati comes in. We perform planning, 3D modeling, full production engineering, and actual production of special parts and installations: Lifting and connecting installations for parts that require high strength Adjustments to existing machines Installations after strength tests Internal auxiliary installations Dedicated parts according to loads, depth, surface conditions, and process requirements Each project is built in its entirety: from the idea to the product installed in the field.

Design and manufacture of conveyors

Conveyor design according to loads, speeds and work environment, including 3D modeling, selection of motors and pulleys, testing of chassis and bearings, and full production in the workshop according to customer needs.

Shelves for heavy loads

Production of shelves for heavy loads including constructor approval

Manufacturing and assembly of instrumentation, control and electrical infrastructure

Execution in the field while complying with safety standards, maintaining the existing route and aligning with the plant's planning.

Design and execution of gates according to customer needs

Design and implementation of electric floating gates according to field suitability and customer approval in accordance with implementation plans

Our proven way to implement any design accurately, cleanly, and quickly: 3D models, early production in the workshop, and professional installation in the field > three steps that ensure production continuity and operational quietness for every factory.

Model preparation and systems coordination

3D models based on customer design, system coordination, and shop drawings for clean and quick installation on site.

Early production in the workshop

Prefabrication of piping, construction and assemblies. Full quality testing before installation.

Quick and clean installation

Factory installations with minimum field time and maximum production continuity.

A permanent, skilled and trained team that brings with it decades of experience in the industry.

Behind every S. Kobati project stands a professional and cohesive team: locksmiths, plumbers and installers. All of them are our permanent employees, familiar with and coordinated with uniform work methods. The advantage for the customer: clean, precise execution and quiet operation from the moment we entered the area.

אודות – ש. קובטי עבודות מתכת ואחזקה בע"מ

ש. קובטי עבודות מתכת ואחזקה בע"מ היא חברה משפחתית שנוסדה בשנת 2007 על-ידי שפיק קובטי.

שפיק בעל מקצוע עם יותר מ־30 שנות ניסיון בשטח: תעשייה כבדה, אחזקת מפעלים, מתקנים מורכבים, וצנרת בתנאי עבודה מאתגרים.

הניסיון הזה, שהגיע מהידיים ומהשטח עיצב את ה־DNA של החברה עד היום: מקצוענות, ביצוע נקי, ואחריות מלאה למה שיוצא מהסדנה.

בשנת 2017 הצטרף לניהול נעים קובטי, מהנדס מכונות ומהנדס ריתוך בינלאומי (IWE), בעל הכשרות מקצועיות מגרמניה — מדינה שנחשבת לאבן יסוד של הנדסה תעשייתית בעולם.

שילוב הניסיון הביצועי של האב עם הידע ההנדסי המעמיק של הבן יצר מודל עבודה ייחודי:
1. תכנון הנדסי מדויק
2. Prefab איכותי
3. התקנות שטח ברמת גימור של מפעלי־על.

זוהי המציאות היומיומית שלנו: שני דורות של מקצוענות עומדים יחד בתוך מתקן חי, מנתחים, מתכננים ומבצעים.

זו החברה שלנו. זה מי שאנחנו

חברת ש. קובטי עבודות מתכת ואחזקה בע"מ ביצעה עבורנו מספר פרויקטים. העבודות באותם פרויקטים נעשו במקצועיות, בלוחות הזמנים שנקבעו תוך הקפדה בביצוע העבודות על עבודות צוותים מסודרת, מקצועית ובטוחה.
אבן קיסר משטחי קוורץ

ש. קובטי מקוציים, אחראים ומבצעים את העבודות עד הסוף באכפתיות ובהבנה עם אילוצים מפעליים וכל זה ללא פשרות בביצוע העבודה
מפעל זהר דליה

Kibbutz Dalia, Israel